[Public-List] Isspro guages and senders

[dterrell1 at charter.net]

   Thanks to all. While different language has been used, I think we are
   all agreed on where this brass nipple is. the next question is how do
   you get the sender and related wire on the nipple? Based on a "feel"
   test, how do you get the sender and wire on the nipple? My sense is
   that there is not enough room to do this. I the engine were a couple of
   inches to the other side it could be done, I think.

   David, 432

   From: "Michael Michael via Public-List"
   <public-list at lists.alberg30.org>
   Reply-To: "Michael Michael" <propwash1600 at yahoo.com>, "Alberg 30 Public
   List -- open to all" <public-list at lists.alberg30.org>
   To: "Alberg 30 Public List -- open to all"
   <public-list at lists.alberg30.org>
   Cc: "Michael Michael" <propwash1600 at yahoo.com>
   Sent: Tue, Sep 12 2023 05:21 AM
   Subject: Re: [Public-List] Isspro guages and senders
   Mine is on the port side at the front near the carburetor.
   Sent from Yahoo Mail on Android On Mon, Sep 11, 2023 at 7:04 PM,
   Marcelo D. Gentinetta via Public-List<public-list at lists.alberg30.org>
   wrote: On mine, the oil pressure sender is located on the right side of
   the engine facing aft just behind the flywheel housing and in front of
   the carburetor. It attaches to the block via a short brass nipple.
   Marcelo Gentinetta #441 Alegria > On Sep 11, 2023, at 2:19 PM, David
   Terrell via Public-List <public-list at lists.alberg30.org> wrote: > >  I
   recently purchased an oil pressure gauge and sender from Moyer as I >
   was having some problems with getting correct readings. When I spoke >
   with Ken at Moyer he told me that the pressure sender needed to >
   attached to the left side of the atomic 4 engine - that is as you face
   >  aft in the boat. > >  I have investigated this option and it looks
   like it is difficult or >  impossible to do this given where the Atomic
   4 is in my boat. > >  So, is there anyone with an Atomic 4 that has has
   successfully done >  this and if so, how did they do it????? > >
   David  432 > _______________________________________________ > These
   businesses support your Association: >
   http://www.alberg30.org/store/A30supporters.html > Please support them.
   > _______________________________________________ > Public-List mailing
   list > Public-List at lists.alberg30.org >
   http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
   _______________________________________________ These businesses
   support your Association:
   http://www.alberg30.org/store/A30supporters.html Please support them.
   _______________________________________________ Public-List mailing
   list Public-List at lists.alberg30.org
   http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
   _______________________________________________ These businesses
   support your Association:
   http://www.alberg30.org/store/A30supporters.html Please support them.
   _______________________________________________ Public-List mailing
   list Public-List at lists.alberg30.org
   http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org